Many in stock





  • Bright, easy-to-read large LED display
  • Durable, compact and lightweight
  • Accurate, reliable readings during low perfusion and motion
  • Audible/visual alarms with adjustable alarm limits
  • Can be used for spot-check and continuous monitoring including while sleeping
  • Suitable for Adult and Paediatric 
  • Paediatric sensor suitable for children between 10-40kgs
  • Measurement Range: 0~100%
  • Accuracy:±2% during 70%~100%, 0%~69% unspecified
Pulse Rate
  • Measurement range: 30 - 250 bpm
  • Accuracy: ±1 bpm or 2%

Visual Displays and Indicators


  • Sp02 Display: Red LED, variable brightness

  • Pulse Rate Display: Green LED, Variable brightness

  • Pulse intensity: Red LED 8 Bars

  • Power Indicator Light: Green

  • Low Power Voltage: Red and Blink


    Low Perfusion Indicator: Red  



  • Audible and Visual Alarms for High/Low SpO2 and Pulse Rate
  • Alarm Limits Adjustable
  • Alarm Silence lnterval:30,60,90,and 120 sec.
  • Sensor Disconnect Alarm
  • Low-battery Warning indicator
Audio Indicators
  • Sensor off (Every 30 seconds)
  • Pulse Beep
  • Key-pressing
  • Low Battery

    Power Requirements:


    • Four Standard"AA" Size Batteries
    • Battery Capacity:≥12 hours



    • Altitude:-390m-5000m
    • Operating Temperature: Operation 0~50℃
      • humidity: ≤95%
    • Transport/Storage Temperature:-40℃-70℃
      • humidity: ≤95%

    Physical Characteristics:

    • Dimensions:69mm(W)x130mm(H)x22mm(D)
    • Net Weight:195g/100g(with batteries/without batteries)
    • Gross Weight:495g/395g(with batteries/without batteries)
    • Sensor Probe Lengths: Approx. 1.5m


    • SpO2: ISO 9919: 2005(E)
    • Safety Standards: EN 60601-1: 1990+A1: 1993+A2: 1995+A13: 1996
    • Alarm: IEC60601-1-8: 2005
    • EMC: EN 60601-1-2: 2007, Group 1 Class A
    • Environment : WEEE (2002/96/EC)
    • FDA 510(K)

        Returns Policy

        There is a 30 day return on any faulty products. To be eligible you must return items at your cost. We guarantee that any product found to be faulty supplied by us, will be accepted for return and we will refund all costs associated with the returned item. Statutory Warranties and conditions of Sale apply in Australia under consumer law for all products supplied by Australian Companies.
        IMPORTANT NOTE: Should any faulty item be a TGA Registered Medical Product or Device, we are required to submit a report to the Registered Manufacturer in accordance with the TGA Legislation. This is a way of ensuring that any device is safely tracked and monitored for safety. We may ask you a few questions and we are required to verify any fault. All standard State & Federal Warranty Conditions apply.


        SOLMED only supplies to Australian Addresses.
        Solmed dispatches all goods via Australia Post or TNT whichever is deemed suitable. We post to all addresses in Australia including Post Office Boxes. Tracking will be notified on Parcels where applicable. Solmed will advise if any product is not available and offer either a substitute, refund or back order.

        Recently Viewed Products