Interpose Non-Adherent Dressing
Interpose Non-Adherent Dressing
Multigate
30-383
NON-STICK WOUND DRESSING
A non adherent and absorbent wound dressing for single use. The dressings consists of a central absorbent layer which is sandwiched on both sides by perforated film. This process helps avoid the problems of exudate strike-through. The central absorbent layer is 100% natural cotton. The film is made from high density polyethylene and has consistent porosity with a thickness of 114 micron. This allows the exudates to easily pass through to the absorbent pad. Either side of the dressing can be applied to the wound.
There are two types of Interpose dressings: Interpose and Interpose Lite. See below for differences.
Physical characteristics of Interpose Dressing
- Average Weight of the dressings is
- Interpose: 210 +/- 20 gsm
-
Interpose Lite: 135 +/- 10 gsm
- Water absorption (AS 2836.6) Water holding capacity:
- Interpose: Not less than 8 gram/gram.
-
Interpose Lite: Not less than 6 gram/gram.
- Average sinking time: Less than 10 seconds
- The cotton absorbent layer meets the requirements of AS 2835.1 1985
Dressing Specs
| Code | Dressing Size | Box Quantity |
| 30-381 | 5 x 5cm | 100 units |
| 30-382 | 10 x10cm | 100 units |
| 30-383 | 10 x20cm | 100 units |
| 30-385 | 25 x 25cm | 120 units |
| 30-501 Lite | 7.5 x 5cm | 100 units |
| 30-502 Lite | 7.5 x 7.5cm | 100 units |
| 30-503 Lite | 7.5 x 10cm | 100 units |
| 30-504 Lite | 7.5 x 20cm | 100 units |
Returns Policy
There is a 30 day return on any faulty products. To be eligible you must return items at your cost. We guarantee that any product found to be faulty supplied by us, will be accepted for return and we will refund all costs associated with the returned item. Statutory Warranties and conditions of Sale apply in Australia under consumer law for all products supplied by Australian Companies.
IMPORTANT NOTE: Should any faulty item be a TGA Registered Medical Product or Device, we are required to submit a report to the Registered Manufacturer in accordance with the TGA Legislation. This is a way of ensuring that any device is safely tracked and monitored for safety. We may ask you a few questions and we are required to verify any fault. All standard State & Federal Warranty Conditions apply.
Shipping
SOLMED only supplies to Australian Addresses.
Solmed dispatches all goods via Australia Post or TNT whichever is deemed suitable. We post to all addresses in Australia including Post Office Boxes. Tracking will be notified on Parcels where applicable. Solmed will advise if any product is not available and offer either a substitute, refund or back order.
