MULTIGATE COMBINE DRESSING STERILE FIRST AID 10CM X 22CM X 50
MULTIGATE COMBINE DRESSING STERILE FIRST AID 10CM X 22CM X 50
Many in stock
Multigate
09-889
MULTIGATE COMBINE DRESSING STERILE FIRST AID
10CM X 22CM X 50
4 Times more absorbent than Wood Pulp or Gauze
SOURCE - SUPPLY - PROTECT
Ideal for GP’s, Beauty, Home, Artists, First Aid Kits etc
Sterile Individually Wrapped TGA 133767
Well known Multigate Brand, Used throughout Hospitals Worldwide
Non Woven super quality
These Premium Non Woven Combines from Multigate consist of a wadding of mixed viscose/polyester fibres enclosed by a non woven polyester cover.
The mixed fibres are confined within the cover by heat sealing.
The ends of the cover and the two edges along the length of the combine are glued.
The absorbent wadding of the non woven combines are made from mixed fibres of 80% Polyester/ 20% Viscose.
The cover enclosing the wadding is nonwoven polyester fabric.
The weight of the non woven fabric is 18gsm.
A synthetic resin is used to bind the overlap in the non-woven covers along the length
on one side of combine.
The carded polyester/viscose fibres are then cut to form wadding of the required size.
A non-woven polyester fabric covers the absorbent wadding.
The ends of the fabric are heat sealed to contain the wadding.
The fabric overlaps the wadding along its length and then sealed with synthetic resin green colour to prevent exposed fibres from the wadding.
Physical characteristics of the non woven swabs are white to off white in colour, minimal lint and with no visible contamination.
Returns Policy
There is a 30 day return on any faulty products. To be eligible you must return items at your cost. We guarantee that any product found to be faulty supplied by us, will be accepted for return and we will refund all costs associated with the returned item. Statutory Warranties and conditions of Sale apply in Australia under consumer law for all products supplied by Australian Companies.
IMPORTANT NOTE: Should any faulty item be a TGA Registered Medical Product or Device, we are required to submit a report to the Registered Manufacturer in accordance with the TGA Legislation. This is a way of ensuring that any device is safely tracked and monitored for safety. We may ask you a few questions and we are required to verify any fault. All standard State & Federal Warranty Conditions apply.
Shipping
SOLMED only supplies to Australian Addresses.
Solmed dispatches all goods via Australia Post or TNT whichever is deemed suitable. We post to all addresses in Australia including Post Office Boxes. Tracking will be notified on Parcels where applicable. Solmed will advise if any product is not available and offer either a substitute, refund or back order.
