SURGICAL FACE MASK TGA ARTG 333644
Hospital Quality Latex Free
& Ultrasonically bonded
"LOOSE PACK OF 50 FROM BULK CARTON"Due to delays in Quality Masks globally and the uncertainty of the quality shipments due to Covid-19 issues, we have sourced our masks from reputable audited companies to ensure the best quality possible. Please feel confident that only TGA Listed Masks will be supplied from our company to ensure customers receive what they would expect for protection. These masks are rated BFE >98%
The disposable masks fulfil the requirements of EN 14683:2019+AC:2019 compatible with the medical devices directive 93/42/EEC. Also complies with ASTM Level 3 Type 2R (160mm HG spray resistance).
Outer layer PP non-woven fabric
Filtration layer Polypropylene melt-blown ）
Inner layer PP non-woven fabric
Polyester Nose clip
Polyethylene covered steel wire
Bacterial filtration efficiency
BFE≥98% Differential pressure
38.2 Pa/cm² Microbial cleanliness
≤30CFU/g Splash resistance pressure
≥16.0 Materials and construction
Microbiology Index Tested GB 15979-2002 as follows:
Coliform Group = Undetected
Pseudomonas Aeruginosa = Undetected
Staphylococcus Aureus = Undetected
Hemolytic Streptococcus = Undetected
Fungus = Undetected
Distributed by Solmed Pty Limited ABN: 16 132 179 250
There is a 30 day return on any faulty products. To be eligible you must return items at your cost. We guarantee that any product found to be faulty supplied by us, will be accepted for return and we will refund all costs associated with the returned item. Statutory Warranties and conditions of Sale apply in Australia under consumer law for all products supplied by Australian Companies.
IMPORTANT NOTE: Should any faulty item be a TGA Registered Medical Product or Device, we are required to submit a report to the Registered Manufacturer in accordance with the TGA Legislation. This is a way of ensuring that any device is safely tracked and monitored for safety. We may ask you a few questions and we are required to verify any fault. All standard State & Federal Warranty Conditions apply.
SOLMED only supplies to Australian Addresses.
Solmed dispatches all goods via Australia Post or TNT whichever is deemed suitable. We post to all addresses in Australia including Post Office Boxes. Tracking will be notified on Parcels where applicable. Solmed will advise if any product is not available and offer either a substitute, refund or back order.